Precautions for use of deep groove ball bearings

Release time:

2022-03-22

For deep groove ball bearings, if the bearing load is too small during operation, sliding will occur between the ball and the raceway, which will cause abrasions. Especially large deep groove ball bearings with high ball and cage weights have this tendency. In many cases, bearings will rust. There are many reasons for bearing corrosion. The most common factors in our daily life are the following:

1) Intruded by moisture, dirt, etc. due to poor sealing device;

2) The bearing is not used for a long time, beyond the anti-rust period, and lacks maintenance.

3) The roughness of the metal surface is relatively large;

4) In contact with corrosive chemical media, the bearing is not cleaned cleanly, there is dirt on the surface, or the bearing is touched with sweaty hands. After the bearing is cleaned, it is not packaged or installed in time, and it is exposed to the air for a long time, and is attacked by air moisture and contaminated;

5) Ambient temperature and humidity and exposure to various environmental media; rust inhibitor failure or quality does not meet the requirements.

Latest News

Exploring the Lifespan of 6000 Deep Groove Ball Bearings: What You Need to Know

2026-02-04

Understanding Needle Roller Bearings: An Essential Component in Industrial Equipment

2026-02-02

How 6300 Deep Groove Ball Bearings Enhance Equipment Reliability: A Comprehensive Guide

2026-01-31

Understanding Tapered Roller Bearings: Essential Insights for Industrial Applications

2026-01-29

Top Features of 6400 Deep Groove Ball Bearings You Should Know

2026-01-24